Table of Contents
It is normal for an appliance or technology to malfunction.
Perhaps this normalcy has been seen as a part of our everyday lives.
Man-made technology often has expiration dates.
They can malfunction at a set time over the years of service.
Gadgets, for instance, can easily be replaced.
Hence, with your garage door cables, they can also be instantly replaced or adjusted once they encounter malfunctions.
Garage door cables are one of the most essential components of the garage door.
They make it easy for the door to be lifted up and down.
Given that, adjustments are necessary whenever it seems out of it.
A garage door repair in Seattle can do it for you, as it could be dangerous to handle such cables on your own.
What’s more, they are on par with the springs when it comes to sharing the heavy burden of the weight of the door.
As such, we recommend that you reach out to a professional for a task like this.
Yet, if you are determined and have the right skills and knowledge for the job, you are free to take matters into your own.
With that, here is how to adjust garage door cables:
-
Prepare the door for the job.
Get the door ready first before you attempt to do the job.
This includes disconnecting the opener and switching it to manual operation.
In order to do this, simply pull on the rope that is located and attached to the opener of the garage door.
Afterward, make sure that the action results in the release of the opener from the drive chain.
After the door is closed, it can be noticed that the tension springs that are responsible for the pulling of the door upwards have become taught.
In order to adjust and fix the cables of the garage door, you should first release the springs and their tension by manually lifting the garage door.
While in the process of such, disconnect the electricity connected to the opener of the garage door for automatic ones. Accidents involving electricity may happen while on the job.
-
Ensure the safety of the valuables and yourself.
A pair of c-clamps must be used for this step.
Then, attach these to the track of the door located below the roller, the one that is in close proximity to the foot of the door.
The door might crash down on you while in the middle of the job.
As a precaution, the c-clamps will ensure that the door will not fall.
-
Disconnect the cord.
Disengage the cord first.
The cable that should be disconnected is located around the frame of the garage door on top of the doorway.
You can see that one of its ends is coiled around the rollers, while the other is compressed to the clip or the hook, which is used to secure it against the frame that is close to the doorway.
Then, find the frame that has holes patched in it.
Afterward, simply disconnect its wire and reconnect it again using one of the holes so as not to loosen the wire.
-
Adjust the cables.
After you have performed the steps above, adjust the cable bracket afterward.
During this step, you will need to use some pliers should there be excess slack found on the cable.
Furthermore, you can use these pliers to unfasten the bracket that is holding the wire to connect it to the hook where it is attached to the door’s frame.
Pull the wiring of the cable by means of the bracket so as to fasten it.
You can then reattach the wire towards the frame of the door through its hook.
ASAP Garage Doors Seattle
Do you need help on how to adjust garage door cables?
ASAP Garage Doors Seattle has got your back.
We are a team of garage door professionals that offer quality garage door repair in Seattle, along with other services on garage door installation in Seattle.
For how to adjust garage door cables, simply contact ASAP Garage Doors Seattle for a guaranteed service.
We can do the repairs for you!
Do not hesitate to reach out to us for any garage door problems.
Contact us today!
