Table of Contents
The springs are one of the most important components of a garage door.
It is tasked with the heavy burden of carrying the weight of the door as it is lifted up or down when it operates.
As such, when these springs break or malfunction, it can mean real trouble.
It can result in a complete shut down of the operation and even more damages if the garage door falls on the floor as the springs cannot carry it anymore.
A garage door repair in Seattle is needed for this kind of job, yet homeowners can also undertake the task on their own if they have the expertise.
For that, here are tips on garage door repair: what you need to know.
Getting to know the springs.
If you are trying to replace the spring on the garage door, it means you already have a clear view as well as knowledge of its different types.
If not, you should educate yourself first about the inner workings of these springs, as well as their types.
This is the most important part of garage door spring repair: what you need to know.
Hence, here are two types of springs:
-
Extension Springs
Extension springs are springs that are long and skinny.
They are in parallel to the horizontal tracks of the door and store their energy by means of stretching or extending whenever the door moves.
Extension springs also come in various kinds, namely, the double-looped springs, open-looped springs, and clipped-end springs.
The double-looped springs feature two coils that are usually found at the rear of the spring that links to the pulley and the eyebolt.
The open-looped springs, on the other hand, are seen as the weakest kind of extension springs, given that they rely on the open wire at the rear.
If this wire breaks, the entire spring has to be replaced itself, notwithstanding whether it is the only part of the door that is damaged.
Lastly, the clipped-end springs are the strongest of the three.
They can function longer and can be used frequently on garage doors that have a weight of more than 200lbs.
-
Torsion Springs
The garage door can employ one to four torsion springs.
It simply depends on the size, weight, and strength of the door.
Such a type of spring is broad, which can be located on a metal shaft that is on top of the opening of the door.
Aluminum drums are placed on each side of the metal shaft, where the springs are winded to a particular torsion setting, which is relative to the system.
Torsion springs can either be standard, early-set, torque-master, or steel rolling-door springs.
A standard torsion spring is most commonly found on garage doors in the residential area, as they are lighter doors that only require a single spring for an effective operation.
The early-set springs, on the other hand, are quite similar to the standard ones.
However, they are placed on the middle of the shaft of the torsion.
On the other hand, the steel rolling-door springs can normally be seen in some of the commercial and industrial buildings.
These are springs that are contained inside the torsion barrel.
The torque-master springs are usually enclosed inside the torsion shaft.
These are held in position by the winding cones that usually sit at the end of the rods.
The common types of springs that are generated for replacements in residential garage doors are usually extension springs.
Yet you can also make use of the standard or torsion springs.
Remember, however, that it is a dangerous task to undertake yourself.
Given that, you should reach out to a garage door repair in Seattle.
ASAP Garage Doors Seattle
When it comes to garage door spring repair: what you need to know, the right professionals should be able to keep you up to speed.
ASAP Garage Doors Seattle has got your back.
We are a team of garage door professionals that offer quality garage door repair in Seattle, along with other services on garage door installation in Seattle.
For garage door spring repair: what you need to know, simply contact ASAP Garage Doors Seattle for a guaranteed service.
Do not hesitate to reach out to us for any garage door problems.
Call us now!
