Garage Door Jerks When Opening

Garage Door Slams Shut

If you are having problems whenever your garage door jerks when opening, then you have come to the right place.

There are a lot of reasons as to why this could be happening and in order to solve it, you should reach out to a garage door repair in Seattle.

In the meantime, here are the reasons why the garage door jerks when opening:

The Garage Door Operation

Garage doors are more than just mechanisms that man the entrance to the garage.

They are a series of metal panels that are insulated, which are connected, and are riding on rollers on the tracks.

It has a spring system that allows it to be easy to operate.

This system is stretched and twisted once the operation starts.

Moreover, they store force in order for the door to be opened.

The Garage Door Opener Operation

A garage door opener operates automatically by means of an electric motor.

It makes use of a series of gears to turn a belt, chain, or rod in order to draw the door either up or push it back down.

Garage Door Issues

If the garage door jerks when opening, it is a sign that there is something wrong with it.

Since the garage door is able to provide lifting force by means of the springs, it can wear and tear, which in turn causes issues.

Problems with the damaged rollers, weatherstripping, and damaged tracks can also arise.

To identify and solve the problem, it is recommended to do the following:

  1. Check the rollers and the hinges.

One of the most common problems lies within the damaged rollers.

Hence, they should be looked into along with the hinges as well as the other hardware used for binding.

If there is a noticeable squeaking as the garage door opens or closes, then they might be the reason why the garage door jerks when opening.

With that, you will need to have the rollers replaced with hardware that matches the old one.

Ensure that the replacement is performed correctly, or else it can have an effect on the operation as well as the lifespan of the door.

If you are not sure how to do it, best call a garage door repair in Seattle.

Aside from the rollers, the hardware of the door might also be causing the jerk.

Hence, you will have to examine this hardware, such as the screws and hinges.

  1. Perform cleaning on the tracks.

Tracks usually absorb large crumbs or else get clogged with grease as well as dust.

Such dirt will have to be cleaned out.

Therefore, you must make a mix of vinegar and water then use it to wipe the tracks as well as the rollers.

  1. Look into the weatherstripping.

The weatherstripping on your door may stick, which will make the door difficult to move.

This might be due to the painting of the door becoming dirty.

Simply clean and lubricate this weatherstripping.

  1. Examine the opener.

The opener has a motor that is attached to a chain or a rod that enables it to be connected to the door.

If it is damaged, you will have to reach out to a professional.

If not, simply perform some lubrication.

  1. Inspect the springs.

The springs of the garage door are located most likely in the center or above the door.

Coiled springs are usually under an extreme amount of tension, especially whenever the door is lowered.

This is because they pull on rollers that coil a wire that is tethered to the rear end of the door.

Once these springs become worn out or damaged, the door will not open.

A worn-out spring can be what is causing the door to jerk.

ASAP Garage Doors Seattle

Do you need help when your garage door jerks when opening?

ASAP Garage Doors Seattle has got your back.

We are a team of garage door professionals that offer quality garage door repair in Seattle, along with other services on garage door installation in Seattle.

If your garage door jerks when opening, simply contact ASAP Garage Doors Seattle for a guaranteed service.

We can do the repairs for you!

Do not hesitate to reach out to us for any garage door problems.

Contact us today!

Rate this post

Customer Promise

At ASAP Garage Doors, we know how valuable your time is. That’s why we make a promise to our customers that we will always do our best to complete our work within the quoted timeframe and, if anything should affect this, we will let you know as soon as possible.

High-Quality Throughout

Every technician that we employ is a qualified and skilled engineer, who takes their craft and results seriously. We will always find the best solution for your needs and it’s thanks to the experience and knowledge of our engineers that we are able to deliver such high-quality services every day.

Industry-Leading Materials and Parts

Our parts have all been manufactured by the best brands in the industry, and are designed, made, and installed to function smoothly for many years to come.

Available 24/7

Whether is light or dark, one of our customer service members is ready to answer any queries you may have. What are you waiting for? Call us now!

Leave a Message

    Proud To Serve Seattle

    Repairing any make and model of overhead door

    Garage Door Installation

    Servicing and improving your garage door

    Huge savings in time, money, and energy

    We have solutions to all garage door problems

    Contact Us
    Our technicians are equipped with masks and gloves complying with health and safety regulations.
    This is default text for notification bar