Table of Contents
Improving the reception of a garage door opener has been the problem of many homeowners.
With a simple click of the remote, the garage door is expected to open or close right away.
However, due to the bad signal or reception, it may not respond right away.
This, in return, makes for a frustrating situation.
We expect the garage door to function right away, but the range of the remote, as well as the antenna, is making it difficult to do so.
Yet, there are solutions for such.
If you know the right garage door repair in Seattle, you can easily increase the range of your opener.
This article, however, provides information on how to improve garage door opener reception to help homeowners.
If you have the right tools and expertise, you can easily do it on your own.
How to Increase the Signal of the Remote
Garage door openers are typically equipped with a range that depends on some of the factors that are each unique to every residence or building.
Hence, the remotes are often created to provide a signal that can be received by the opener’s receiver at a distance of four to five vehicles away from the garage.
This is due to the fact that you can open the remote immediately after pulling into the driveway.
Such is part of the safety feature equipped in a garage to prevent the operation of the garage door when the owner is miles away just to be safe.
Antenna Extension Installation
To begin the installation, simply gather the following materials first:
- Stepladder
- Screwdriver
- Insulated Wire Staples
- Hammer
- AA or triple-A battery.
- Antenna extension kit
Step 1
Set a step ladder on the spot near the garage door opener.
Then, depress the tabs that are located on the bottom of the cover behind the unit.
Then, have the cover removed to expose the connection of the antenna.
Step 2
Have the screw loosened, which is used to attach the small antenna of the unit and then remove the wire.
Then, attach the wire at the other end of the antenna’s extension to the screw.
Tighten it afterward.
Step 3
If necessary, place the ladder in another position in order to place the wire of the antenna along to the top of the door or the bottom of the joist that has been opened toward the front of the garage door.
After that, simply fasten the antenna’s wire about every twelve inches by using the wire staples and a hammer.
Step 4
Affix the long stem from the bracket of the antenna that is located at the ceiling or the bottom of the joist using the screws.
After, have the wire of the antenna screwed into the other side of the connection coupler on the bracket.
Then, screw the base of the antenna into the other opposite of the coupler.
Step 5
Finally, the last step on how to improve garage door opener reception is to have the back of the remote removed.
It depends on the style, but you usually only need to slide the back off or remove the screw.
Then, place the new battery, such as an AA or triple-A in the remote then place the back.
It is best to place the remote and attach it to the sun visor of the vehicle.
You can avoid using a dashboard or a metal ashtray with this.
Metallic objects are known to disrupt reception.
More the metallic objects first before installing the extension kit.
This will prevent any signal from being disrupted when it is between the remote and the opener.
Afterward, simply test the remote to see if it works.
ASAP Garage Doors Seattle
Do you want to know more about how to improve garage door opener reception?
ASAP Garage Doors Seattle has got your back.
We are a team of garage door professionals that offer quality garage door repair in Seattle, along with other services on garage door installation in Seattle.
For how to improve garage door opener reception, simply contact ASAP Garage Doors Seattle for a guaranteed service.
Do not hesitate to reach out to us for any garage door problems.
Call us now!
